Reliable and Long-Lasting InfiniPower
With a long-lasting lifespan and impact-resistant design, Anker SOLIX C1000X is built to withstand the toughest adventures.
The Smart App to Control Your Power
Customize your power on the go to your exact specifications with the Anker app. You can also check the status of Anker SOLIX C1000X using Wi-Fi or Bluetooth.
Seamless UPS Transfer
If the power goes out, you won't know. There's less than 20ms of switchover time
15% Smaller Than Industry Average
You don't need to do any heavy lifting. Anker SOLIX C1000X is more compact and just as powerful as similar-capacity LFP power stations.
Convenient, Built-In LEDS
Make the situation brighter, whether you're outdoors or the power's gone out, thanks to built-in LEDs.
1.5X Higher Performance
Watch high sunlight conversion in action with 23% efficiency.
Suncast Smart Alignment
No more guessing. A dot makes it easy to align your panels just right to maximize solar power generation.
Charge 2 Devices at Once
A 12W USB-A and a 15W USB-C port provide more charging. So plug in your phone, camera, camping light, and more.
Explore and Recharge Renewably
Recharge to 100% in 1.8H with 600W Input.
Advanced Safety for Peace of Mind
Power up care-free with short-circuit and overvoltage protection to keep you and your devices safe.
Anker SOLIX C1000X Portable Power Station Specifications
-
Capacity: 1056Wh
-
Battery Type: LiFePO4 (Lithium Iron Phosphate)
-
Battery Lifecycle: 3,000 cycles to 80%+ capacity
-
AC Continuous Output: 1800W Pure Sine Wave
-
AC Surge Output: 2400W
-
AC Outlets: x6
-
Solar Input Recharge: Max. 600W, 11-60V MPPT
-
AC Input Recharge: Max. 1300W
-
Cigarette Lighter Output: 120W, 12V/10A
-
UPS Switch Time: <20ms
-
USB-A Output: 2 x 12W
-
USB-C Output: 1× 100W, 1× 30W
-
Scalability: Up to Max. 2112Wh Capacity with Expansion Battery
-
Discharging Temperature: -4°F - 104°F
-
Charging Temperature: 32°F - 104°F
-
Wireless Connection for App: WiFi & Bluetooth
-
Length × Width × Height: 14.8×8.07×10.5in (37.6×20.5×26.7 cm)
-
Net Weight (kg): 28.44 lb /12.9kg
-
Warranty: 5 Years Warranty
Frequently Asked Questions
Q1: How do I use a solar charger to charge Anker SOLIX C1000?
- Use an 11-60V solar charger with an XT-60 connector.
- For 11-32V, the supported current is 10A max.
- For 32-60V, the supported current is 12.5A max.
- For best compatibility, use these Anker solar panel series: 625, 531, or PS400.
Q2: How should I store and maintain the power station?
- Turn off all outputs when not in use to avoid battery power loss.
-Store in a dry and cool area.
- Check battery capacity each week. If the battery level is below 30%, charge to 100%. Fully charge once every 3 months.
Q3: How do I use the Anker app?
-Connect to a network before using the app for the first time.
- After connecting to a network, connect the power station to off-grid devices via Wi-Fi or Bluetooth.
Q4: Can I recharge Anker SOLIX C1000 using AC and DC input simultaneously?
This is not possible. AC input is prioritized if both AC and DC inputs are connected. When AC recharging ends, Anker SOLIX C1000 switches to DC recharging automatically.
Q5: How many UL certifications has Anker SOLIX C1000 received from SGS?
Four. Anker SOLIX C1000 is certified by SGS in accordance with UL 1012, UL 1778, UL 1973, and UL 60730.
SurgePad™ activates when total output exceeds rate output. Heat-generating devices work best. SurgePad™ does not support precision instruments and other devices with voltage protection or a strict voltage requirement.
Q7: Why can't the car charger port charge my device less than 120W?
Sometimes, overload protection is triggered. To avoid this, insert your device into the car charging port, and then activate the car charging switch to start charging.